How to fly DJI Mini 2
Here, we introduce how to fly DJI Mini 2.
Click
here
for more information on DJI Mini 2.
DJI Mini 2 instructions. 4K aerial video mini drone weighing 249g
このページを日本語で見る
Table of contents
- Preparing for flight
- Suppress screen rotation and notification
- How to use DJI Fly app
- Preparation for takeoff
- Precautions when temperature is low
- Take off
- Control method
- Landing
- Motor stop
- Emergency stop in flight
- Fn/Customizable button
- Front LED customization
- Warning sound from controller
- Pause / RTH button
- Taking a video / photo
- Drone flight techniques
DJI Mini 2 Drone Unboxing to first flight
Watch on YouTube
Suppress screen rotation and notification
Suppress iPhone screen rotation and notifications before the flight.
Otherwise, the screen may rotate during the flight and drone flies away, or you may receive a phone call and lose control.
Screen rotation and notification suppression can be set with one touch from the control center.
To suppress notifications, set “
Focus
” mode to ON.
Just open the Control Center and tap on the two icons shown in the figure.
Also, use the Guided Access function to prevent switching to apps other than the DJI Fly app due to operational mistakes during flight.
How to use the Control Center (Japanese)
Enable only one app: How to use the Guided Access (Japanese)
How to use DJI Fly app
When finish the Prepare DJI Mini 2 for flight , the screen of the DJI Fly app will look like this.
| No. | Description |
|---|---|
| 1 | Tap “<” to return to the home screen. See How to use DJI Fly app page for how to use the home screen. |
| 2 | View and change the flight mode. Each tap switches to [S] ports - [C] ineSmooth - [N] ormal mode. See the DJI Mini 2 knowledge page for these three flight modes. |
| 3 |
Aircraft status such as “In Flight” and various messages are displayed here.
Tap here to check and change the Auto RTH Altitude, Max Altitude and Max Distance limit, and to check the remaining capacity of the SD card. |
| 4 | This shows battery level of the drone. |
| 5 | Here you can see drone flight remaining time, battery temperature, battery voltage, etc. |
| 6 | OcuSync signal strength between the drone and the controller is displayed. |
| 7 | The number and signal strength of GPS satellites that the drone is receiving are displayed. When this area turns white, home position is recorded and the RTH (Return to Home) function can be used. See the DJI Mini 2 knowledge page for the Return to Home feature. |
| 8 | Tap here to open the settings screen. |
| 9 | Tap here to start Auto take-off / Auto landing / RTH (return to home) function. |
| 10 |
Switches the shooting format.
Single shot / interval shooting / Automatic exposure bracket (AEB) can be selected in the photography mode. In video mode, you can switch between resolution and frame rate. 4k resolution 24/25/30 fps, 2.7k resolution 24/25/30 fps, 1080p resolution 24/25/30/48/50/60 fps can be selected. The quick shot (Rocket / Circle / Dronie / Helix / Boomerang ) is also started from here. |
| 11 |
This is a shutter button.
In photography mode (white), tap to take a photo. In video mode (red), recording will start / end each time you tap. |
| 12 | Switch to the playback screen. You can play back the photos and videos you have taken. See Enjoy photos and videos taken with DJI drone / How to use DJI Mimo function page for detailed operation. Let's operate after landing the drone. |
| 13 | Each time you tap this, you can show / hide the map of the current location. |
| 14 | The lower number indicates the altitude relative to the home point (takeoff point), and the upper number indicates the current ascent / descent speed. |
| 15 | The lower number indicates the distance from the home point (takeoff point), and the upper number indicates the current horizontal speed. |
| 16 | Radar : Displays the flight direction of the drone. GPS and compass of iPhone and drone are used to display drone's position and flight direction with respect to direction pilot is facing. |
| 17 | Displays current photo / video format and remaining capacity / recordable number / time for it. Tap to switch display of capacity, number of photos / recording time. |
| 18 |
Tap to change EV value (Exposure Value) when in the Photo and [Auto] mode.
In [Manual] mode, shutter speed can be displayed and changed. |
| 19 |
Tap to change AE (Auto Exposure) lock / release when in the Photo and [Auto] mode.
In [Manual] mode, ISO sensitivity can be displayed and changed. |
| 20 | Tap to change [Auto] / [Manual] mode in the Photo mode. |
Flight mode [S] ports-[C] ine-[N] ormal can also be switched with the slide switch in the center of controller.
See
DJI Mini 2 knowledge
page for these three flight modes.
Preparation for takeoff
Then wait for the home point to be recorded. If GPS is enabled, after a while, the status indicator will flash green quickly to notify you that the home point has been recorded. Once the home point is recorded, you can use the Return to Home function.
When you tap the message display at the top left of the camera view screen (No.3 position on the “How to use the app” above), the screen becomes as shown in the figure, and you can check and change the Auto RTH Altitude, Max Altitude, and Max Distance limit. Let's set an appropriate value.
See DJI Mini 2 specifications page for the status indicator colors and the meaning of blinking. And see DJI Mini 2 knowledge page for the Return to Home feature.
DJI Mini 2 specifications
DJI Mini 2 knowledge
Precautions when temperature is low
When the temperature drops below 5 degrees Celsius (below 41 degrees Fahrenheit), battery performance drops significantly. If you need to fly in such an environment, be sure to fully charge it before flying, hover for a while to warm the battery, and then start flying.Take off
There are two ways to take off the DJI Mini 2: Auto take-off and Manual take-off. And depending on the location and conditions of takeoff, a warning may be displayed.Auto take-off
Open the camera view screen of the DJI Fly app and tap the
icon.
Then press and hold the “Take off” icon that appears on the screen.
Release your finger when the ring surrounding the icon turns green.
Then the motor will start and take off automatically.
The drone will hover at an altitude of about 1.2m above the surface.
Manual take-off
First, start the DJI Mini 2 motor.
To do this, use the controller Combination Stick Command (CSC).
Tilt both sticks downward inside or outside at the same time to start the motor.
When the motor starts, lift your fingers from both sticks.
Then push the throttle stick (left stick) slowly forward. And the rotation speed of the motor will increase and eventually take off.
Takeoff warning
Depending on the flight location and conditions, “Unable to take off” may be displayed in a red box like this.
In such a case, tap this “Unable to take off” message.
Then you can see the reason for the warning.
If there is no problem, tap “Unlock” to the right of the warning text.
Then a confirmation screen is displayed, so you can cancel the warning by tapping “Agree”.
However, the warning cannot be canceled if the aircraft is in a no-fly zone, which is prohibited by drone flight rules.
Control method
To switch modes, tap the
(Settings)
icon at the top right of the screen with the DJI Fly app, and go to the [Control]-[Stick Mode] screen.
Drone operation method / practice method and flight technique
Landing
There are two ways to land the DJI Mini 2: Auto landing and Manual landing.Auto landing
Tap the
icon on the camera view screen of the DJI Fly app.
And press and hold the “Landing” icon displayed on the screen.
Release your finger when the ring surrounding the icon turns green.
Then the rotation of the motor will decrease and the drone will descend with beeping.
The drone will then automatically land and the motor will stop.
If you tap the
icon displayed on the screen while landing, you can cancel auto landing.
Manual landing
For more information on landing protection, see DJI Mini 2 knowledge .
DJI Mini 2 knowledge
Motor stop
There are two ways to stop the DJI Mini 2 motor.The first is to use only the throttle stick. After landing the drone on the ground, keep pulling the throttle stick (left stick) toward you. Then, the motor stops after about 3 seconds.
The other is to use CSC, just like at the start. After landing the drone on the ground, first pull the throttle stick (left stick) toward you, then tilt both sticks downward inside or outside at the same time to stop the motor. When the motor stops, lift your fingers from both sticks.
Emergency stop in flight
The motor can be brought to an emergency stop during flight, such as when control is lost. Immediately drop the drone on the spot.As with motor start, CSC can be used to make an emergency stop. Tilt both sticks downward inside or outside at the same time to stop the motor.
Fn/Customizable button
You can also assign functions such as "return gimbal to center", "display map", e.t.c. to tap and double tap action. Functions can be assigned by tapping
(Settings)
icon at the top right of the screen in the DJI Fly app and selecting [Control]-[Remote Controller]-[Button Customization] screen.
Front LED customization
(Settings)
icon at the top right of the screen in the DJI Fly app, and select [Control]-[Aircraft]-[Front LED Mode / Front LED Color] screen.
Initial value is white and breathing (slow blinking).
Warning sound from controller
The controller beeps during RTH (return to home) operation and when the battery is below 10%. Of these, warning sound when battery level is 6% to 10% can be turned off by pressing power button. Warning sound during RTH flight and when the battery level is 5% or less cannot be turned off.The controller also sounds a warning if you do not operate anything for more than 5 minutes after turning on the controller. And after 6 minutes, the power will be turned off automatically. The warning sound in this case can be turned off by operating the stick or any button.
Pause / RTH button
Press and hold this button to start the RTH (Return to Home) function. For more information on the RTH function, see DJI Mini 2 knowledge .
DJI Mini 2 knowledge
