• Share page
  •  
  •  
  •  
  •  

How to use OpenTX Radio: How to fly TinyWhoop

Jumper T12 Pro OpenTX radio controller
OpenTX is a well-known radio / transmitter firmware used in Tiny Whoops / FPV drones. Here, we have summarized basics of how to use radio equipped with OpenTX using Jumper T12 Pro as an example.
With radios that use OpenTX, such as FrSky Taranis series, Jumper T16, Jumper T-LITE, RadioMaster TX16S, e.t.c, it seems that almost the same operation is possible. However, key switch assignment / function differs depending on model, and screen / menu configuration differs depending on installed version of OpenTX.
For more information on Tiny Whoops, see Introduction to Tiny Whoop for beginner: How to fly Cine Whoop / Tiny Whoop / FPV drone .
These are websites where you can get information about OpenTX.

Various radios equipped with OpenTX

  • Jumper T12 Pro Radio Transmitter Hall Gimbal 2.4G 16CH Open Source Multi-Protocol RC Transmitter

    Jumper USD129.99

    On-board firmware:OpenTX
    Comes with a R1F receiver, no need for you to find another compatible receiver, more convenient for fpv drone zealots like you. JP4-in-1 Multi-protocal module includes. DSM2/X, FrSKY, SFHSS, FlySky, FlySky AFHDS2A, Hubsan and more.

    Buy at Amazon.com(US) Buy at Amazon.co.uk(UK)

  • Jumper T-LITE Open Source Multi-Protocol RC Transmitter

    Jumper USD83.00

    On-board firmware:OpenTX
    Internal Multi-protocal module. Full Size Adjustable Hall Sensor Gimbals. Internal USB-C Charging. Removable Antenna. Battery life up to 6 hours.

    Buy at Amazon.com(US) Buy at Amazon.co.uk(UK)

  • RadioMaster T8 Pro

    RadioMaster USD89.99

    On-board firmware:OpenTX
    T8 Pro is compatible with all CC2500 protocols supported by the Multi-Module project such as Frsky D8, D16, Futaba S-FHSS, RadioLink, Graupner HoTT and more! Just select the right protocol via the menu system with the included clip on OpenTX screen control unit and fully customize your model configuration with the full capability of OpenTX at your fingertips.

    Buy at Amazon.com(US) Buy at Amazon.co.uk(UK)

  • RadioMaster TX12

    RadioMaster USD105.00

    On-board firmware:OpenTX
    Supported protocols: Corona, Hitec, Futaba S-FHSS, Frsky D16 / D8, RadioLink, Graupner HoTT. External modules are also available: Compatible with JR / FrSKY / Crossfire. Frequency: 2.400GHZ-2.480GHZ

    Buy at Amazon.com(US) Buy at Amazon.co.uk(UK)

  • RadioMaster TX16S

    RadioMaster USD199.99

    On-board firmware:OpenTX
    Multi-Protocol OpenTX Remote Controller(Mode 2), Includes: Transmitter, USB Type C Cable, Foam Case(Battery NOT included)

    Buy at Amazon.com(US) Buy at Amazon.co.uk(UK)

  • FrSky Taranis X9 Lite Transmitter Access Protocol for RC Drone

    FrSky USD99.97

    On-board firmware:OpenTX
    FrSky Taranis X9 Lite is a remarkable fusion of traditional radio design with the innovations of ACCESS protocol. The X9 Lite inherits its classic form factor from the FrSky Taranis X9D series remote control, along with completely preserving the comfort of the classic grip design, it also adds a program scroll button adding convenience when navigating the menu further improving the user experience.

    Buy at Amazon.com(US) Buy at Amazon.co.uk(UK)

  • FrSky Taranis Q X7 16 Channels Transmitter Remote Controller

    FrSky USD124.98

    On-board firmware:OpenTX
    This is a lightweight feature packed reliable system and it comes in black or white color scheme. The radio includes a Haptic Vibration Feedback System which provides an alternative feedback system to the voice and sound alert warnings.

    Buy at Amazon.com(US) Buy at Amazon.co.uk(UK)

  • FrSky Transmitter Taranis X-Lite S 24CH Radio

    FrSky USD179.99

    On-board firmware:OpenTX
    Ergonomic and compact design M12 Lite hall sensor gimbals Compatibility: ACCESS and ACCST D16 mode receivers. With installed ACCESS protocol Lower latency (down to 12ms) High-speed digital interface of internal and external modules.

    Buy at Amazon.com(US) Buy at Amazon.co.uk(UK)

  • BETAFPV Lite Radio 2 Transmitter

    BETAFPV USD45.99

    On-board firmware:OpenTX
    Designed for FPV racing starters, and supports Bayang protocol and Frsky protocol (D16/ D8). LiteRadio 2 is powered by OpenTX firmware. Totally 8 channels and has a hobby-grade gimbal.

    Buy at Amazon.com(US) Buy at Amazon.co.uk(UK)