The control stick/yoke does not move!? If multiple game controllers are connected to Microsoft Flight Simulator
このページを日本語で見る
Normally, you just connect a game controller to your computer and operate the left analog stick on the controller to move the control stick/yoke as shown in this figure.
However, if you have multiple game controllers connected to your computer, this may stop working.
Be careful when adding a controller to a gaming computer that has a built-in game controller, or when replacing multiple controllers.
In such a case, delete all key assignments for game controllers that are not used for control.
Select [OPTIONS] from the main screen.
Then you will see a screen like this.
Click [CONTROLS OPTIONS] on the far right.
Then you will see a screen like this.
There are multiple [CONTROLLER] that have been connected to the computer in the past lined up.
Each one has the [DEFAULT] profile assigned to it.
Select the controller you want to disable and click [OPEN PRESET MANAGER] at the bottom left of the screen.
If you open the assign menu for each controller on this screen and operate the buttons, the display of the assign menu will change in response. If you are not sure which controller to configure, use this method to determine.
When you click [OPEN PRESET MANAGER], a screen like this will appear.
Clicking the [+] icon will create a new empty profile.
Give your new profile a name.
Then click OK.
Then you will see a screen like this.
I created a profile called [NO ACTION] with no key assignments.
Finally, click [APPLY AND SAVE] at the bottom left of the screen.
That's all.